18/10/02 mod. C MAN-016 D
18
3.8.9 INSERT THE SPARK PLUG CAP ON
THE SPRING (SEE FIG. 30). INSTALL THE
SPARK PLUG AND THE CAP OVER THE
SPARK PLUG.
• INSTALL THE SPARK PLUG
• INSTALL THE SPARK PLUG CAP
MAKING SURE THAT THE SPRING IN
THE CAP IS WELL INSERTED IN THE
SPARK PLUG.
3.9
INSTALL THE INTAKE SILENCER
- MAKE SURE THAT THE FILTER HAS THE
INLET HOLES TOWARDS THE UPPER SIDE.
- FIX THE FILTER ON THE CARB, WITH A
STEEL CLAMP, AND THE FILTER TO THE
CHASSIS SIDE RAILS WITH PLASTIC
CLAMPS (SEE FIG. 31-32)
Fig.30
Fig.31
Fi
To Next Page
Loading...
