4
MAIN BEARINGS
With the roller bearings, the lifetime is a full sporting season.
CONROD BIG END CAGE, CRANKPIN and WASHERS
The replacement must be performed after an approximate consumption of 120lt
of fuel.
CONROD SMALL END CAGE
The replacement must be performed after an approximate consumption of 120lt
of fuel.
CONROD
We recommend to replace the conrod when the ovalization of big end bore
exceeds 0.01mm. This value is the difference between the diameter measured in
"A" and "B" as below indicated.
As a general prescription, we recommend to replace it after an approximate
consumption of 240 litres.