IAME X30 125cc RL - TaG - Chassis Installation; Engine Mounting Sketch

- 6 - MAN-043E ENG
Section 2 - PREPARATION AND INSTALLATION OF THE ENGINE ON THE CHASSIS
NOTE:
In case the engine is supplied already assembled on the chassis, it is at care of the assembler to follow these
instructions. The final customer, in this case, can skip this section and can start reading from section 3.
Whenever the engine or a component is disassembled, it is necessary to always follow the under shown
Instructions for proper reassembly.
2.1 INSTALLATION SKETCH OF THE ENGINE ON THE CHASSIS
CHASSIS RIGHT SIDE
CHASSIS LEFT SIDE