iBaby M2C - Installation Instructions; APP Download; Device Startup

iBaby MonitorUser Manual
5
2
Installation instructions
2.1
APPDownload
Apple users: App Store search for "iBaby Care App"
Android users: Search the "iBaby Care App" on the Google Play Store
The application icon is shown below:
2.2
Device startup
Plug the device into the power supply. After about 30 seconds, the power-on prompt sounds
and the rear LED status light turns red and flashes slowly, indicating that the device startup is
complete and enters the standby state.
Note:
If the device has been activated on the server, no power-on tone will sound when powering up.
For the meaning of LED status lights, see Table 1 in Section 4.1.
material
Otheres
Use
environment
indoor use
Product power
consumption
within 2.5W when no one is watching during the day, within
3W after the infrared light is turned on at night
Working
environment
temperature: -10~40 °C, humidity: 40 °C ≤75%
Storage
environment
temperature: -40 ° C ~ 55 ° C, humidity: 55 ° C ≤
90%
Size
body size: 585*55*55mm (length * width * height)
packing size: 222*222*77mm (length * width * height)
Weight gross weight: 380g
System requirements
Mobile
operating
system
iOS8.0 or above,Android4.0 or higher
Certification Certificate FCC CE ROSH RCM KC