iBaby M2C - FAQs; Device LED Status Light Meaning; Installation Issues

iBaby MonitorUser Manual
15
4
FAQs
4.1 Device LED Status Light Meaning
LED status
Meaning
Red slow flashing
The device is not connected to
WI-FI, to be activated.
Green slow flashing
The device is connected to WI-FI but
has not been activated yet.
Steady red The device is activated without being
connected to WI-FI.
Steady green
The device is working normally.
Red light and green light
alternately flashes
Device startup.
No light
The device is not powered or faulty.
Table 4.1
4.2 Installation issues
Question 1Apple users:
Prompt during installation, if you can't see any progress, please click Cancel
(LED status light behind iBaby, red flashing)