IBC TopFix 200 User Manual

42
Version 17.01, as of: 27-Jun-2017
Step 7B: Affix the TRAPEZOIDAL CLAMP to the outer roofing with self drilling screws
 When using the self drilling screws, two screws are placed per TRAPEZOIDAL CLAMP. In this
process, make sure you screw carefully to maintain static properties.
 The enclosed self drilling screws 5,5x25 are approved for a sheet metal or aluminium thickness of
0.5 mm to 1.5 mm.
Important:
A drill with a diameter of 5.0 mm is mandatory to maintain static properties
Step 8A: Insert and affix the transverse securing clamp with blind rivets
 The transverse securing clamps are affixed next to the trapezoidal clamp on the left and right with a
clearance of approximately 20 mm.
 There must be a minimum of two transverse securing clamp per string (15.60 m).
Important:
Mount additional transverse securing clamps on roofs that are particularly exposed to wind.
Figure 69: Insert transverse securing clamps Figure 70: Drilling transverse securing clamps
Figure 67 Apply the screw
Figure 68 Trapezoidal clamp screwed

IBC TopFix 200 Specifications

General

Brand	IBC
Model	TopFix 200
Category	Racks & Stands
Language	English