IBM AS/400 - Access Plate

Access Plate
1 Power off the system. See Powering Off
the System in Chapter 3, "Service Refer-
enced Procedures"
on page 3-1.
2 Disconnect the power cord.
3 Remove the covers. See "Covers" on
page 1-10.
1-2 AS/400 940219404 Models 2xx Repair and Parts
4 Remove the screws m.
5 Lift the access plate up and off of the
frame.
6 Replace the access plate by reversing the
removal procedure.
This ends the procedure.