IBM AS/400 Repair And Parts

Workstation Plate
1 Power off the system. See Powering Off
the System
in Chapter 3, "Service Refer-
enced Procedures"
on page 3-1.
2 Disconnect the power cord.
3 Remove the covers. See "Covers" on
page 1-10.
4 Remove the access plate. See "Access
Plate"
on page 1-2.
1-24 AS/400 940219404 Models 2xx Repair and Parts
5 If you have a card enclosure installed,
remove the cards. See "Cards"
on
page 1-4.
6 Disconnect the workstation plate cable or
cables from the MFIOP.
7 Remove the workstation plate from the
frame by removing the screws.
8 Install the workstation plate by reversing
the removal procedure.
This ends the procedure.

IBM AS/400 Specifications

General

Brand	IBM
Model	AS/400
Category	Network Hardware
Language	English