IBM AS/400 User Manual

AS/400
Prompt AS/400 Parameter
5494
AS/400
Value 5494 Value NotesField Subfield
Local
adapter
address
ADPTADR H1 5 - - Values specified in the AS/400
line description (CRTLINTRN
command) and for the 5494
Remote Controller Unit must
match.
local area
network
(LAN)
remote
adapter
address
ADPTADR 15 - - - Values specified for the AS/400
CRTCTLAPPC command and
for the 5494 Remote Control
Unit must match.
Destination
service
access
point
(DSAP) F - - - Values specified for the AS/400
CRTCTLAPPC command and
for the 5494 Remote Control
Unit must match.
Local
location
name
LCLLOCNAME H1 1 - - Values specified for the AS/400
CRTCTLRWS command and for
the 5494 Remote Control Unit
must match. This will probably
match LCLLOCNAME in the
network attributes. This value
will probably match the
LCLLOCNAME in the network
attributes.
Remote
control
point name
RMTCPNAME 13 - - - Values specified for the AS/400
CRTCTLAPPC command and
for the 5494 Remote Control
Unit must match.
Remote
network
identifier
RMTNETID 11 3 - - Values specified for the AS/400
CRTCTLAPPC and
CRTCTLRWS commands and
for the 5494 Remote Control
Unit must match. This will
probably match LCLNETID in
the network attributes and H1:2.
Remote
location
name
RMTLOCNAME 12 - - - Values specified for the AS/400
CRTCTLRWS command and for
the 5494 Remote Control Unit
must match.
42 Version 5

IBM AS/400 Specifications

General

Brand	IBM
Model	AS/400
Category	Network Hardware
Language	English