IBM AS/400 User Manual

Matching AS/400 parameters for a 5494 connected by Ethernet
You must coordinate communications configuration parameters between AS/400 and the 5494 controller
that is connected by Ethernet. A description of these parameters are in the following table. Then the
related fields and subfields from the 5494 configuration display, and the AS/400 configuration value and
the matching 5494 value entered in the display subfield. You can coordinate these values manually or
automatically. Pick one of these ways:
44 Version 5

IBM AS/400 Specifications

General

Brand	IBM
Model	AS/400
Category	Network Hardware
Language	English