Need help?Do you have a question about the IBM BladeCenter HS22 and is the answer not in the manual?
General| Tcase | 76.2 °C |
|---|---|
| Bus type | QPI |
| Stepping | B1 |
| FSB Parity | No |
| Processor code | SLBZ8 |
| Processor cache | 12 MB |
| Processor cores | 6 |
| Processor model | E5649 |
| System bus rate | 5.86 GT/s |
| Processor series | Intel Xeon 5600 Series |
| Processor socket | Socket B (LGA 1366) |
| Processor threads | 12 |
| Processor codename | Westmere EP |
| Processor frequency | 2.53 GHz |
| Processor cache type | Smart Cache |
| Processor lithography | 32 nm |
| Processor manufacturer | Intel |
| Processor package size | 42.5 X 45 mm |
| Processor front side bus | 1333 MHz |
| Processor boost frequency | 2.93 GHz |
| Processor operating modes | 64-bit |
| ECC supported by processor | Yes |
| Supported instruction sets | SSE4.2 |
| Thermal Design Power (TDP) | 80 W |
| Compatible processor series | Intel® Xeon® |
| Number of processors installed | 1 |
| CPU multiplier (bus/core ratio) | 19 |
| Maximum number of SMP processors | 2 |
| Physical Address Extension (PAE) | 40 bit |
| Memory types supported by processor | DDR3 800/1066/1333 |
| Memory channels supported by processor | Triple |
| Memory bandwidth supported by processor (max) | 32 GB/s |
| Maximum internal memory supported by processor | 288 GB |
| HDD size | 2.5 \ |
| RAID levels | 0, 1 |
| HDD interface | Serial Attached SCSI (SAS) |
| Total storage capacity | 0 GB |
| Maximum storage capacity | 1 TB |
| Number of HDDs installed | 0 |
| Internal memory | 12 GB |
| Memory clock speed | - MHz |
| Internal memory type | DDR3-SDRAM |
| Maximum internal memory | 192 GB |
| Memory layout (slots x size) | 3 x 4 GB |
| Graphics card | G200eV |
| Graphics card memory type | GDDR2 |
| Networking features | Gigabit Ethernet |
| PS/2 ports quantity | - |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Compatible operating systems | Microsoft Windows RedHat, SUSE, VMware Oracle Solaris |
| Chassis type | Rack (1U) |
| Processor ARK ID | 52581 |
| Intel® Turbo Boost Technology | 1.0 |
Weight and Dimensions| Depth | 446 mm |
|---|---|
| Width | 245 mm |
| Height | 29 mm |
| Weight | 5400 g |
Provides caution and danger information used in this documentation.
Details about controls and LEDs on the blade server.
Guidelines before installing the blade server or optional devices.
Instructions to remove the blade server from the BladeCenter unit.
Instructions to open the blade server cover.
Instructions to install an optional expansion unit.
Instructions to remove an optional expansion unit.
Instructions to install a hot-swap storage drive.
Instructions to remove a hot-swap storage drive.
Instructions to install memory modules in the blade server.
Instructions to remove a memory module from the blade server.
Instructions to install a microprocessor and heat sink.
Instructions to install a USB Flash key in the blade server.
Instructions to install an I/O expansion card in the blade server.
Instructions to install a CFFh expansion card in the blade server.
Instructions to remove a CFFh expansion card from the blade server.
Instructions to install a CIOv expansion card in the blade server.
Instructions to remove a CIOv expansion card from the blade server.
Instructions to install a storage interface card in the blade server.
Instructions to remove a storage interface card from the blade server.
Final tasks to complete the blade server installation.
Instructions for how to close the blade server cover.
Instructions to install the blade server in a BladeCenter unit.
Change system settings like IRQ, date, time, and password.
Install the blade server OS using the ServerGuide CD.
To Next Page
