To check for updates, complete the following steps.
Note: Changes are made periodically to the IBM Web site. Procedures for locating
firmware and documentation might change from what is described in this
document.
1. Go to http://www.ibm.com/systems/support/.
2. Under Product support, click BladeCenter.
3. Under Popular links, click Software and device drivers for firmware updates,
or click Publications lookup for documentation updates.
You can subscribe to information updates specific to your blade server at
http://www.ibm.com/support/mynotifications.
The model number and serial number are on the ID label that is behind the control
panel door on the front of the blade server, and on a label on the side of the blade
server that is visible when the blade server is not in the BladeCenter unit.
Note: The illustrations in this document might differ slightly from the hardware.
The blade server (HS22V Type 7871 and 1949) is shown in the following
illustration.
Release
levers
Release
buttons
A set of blank labels for your blade server comes with the BladeCenter unit. When
you install the blade server in the BladeCenter unit, write identifying information
on a label and place the label on the BladeCenter unit bezel. See the
documentation for your BladeCenter unit for recommended label placement.
Important: Do not place the label on the blade server itself or in any way block
the ventilation holes on the blade server.
2 BladeCenter HS22V Type 7871 and 1949: Installation and User's Guide
To Next Page
Loading...
Need help?
General