IBM Carrier Grade X3650 T - Page 35

IBM® Carrier Grade Server X3650 T
Revision 3.0
27
SysCon Device will be automatically adopted as the settings for the current system and the following
messages are displayed and logged:
Replacement system detected due to system attribute change
Restoring settings to replacement system
If the policy ‘AlwaysRestoreSavedSettings’ is not set, the following messages are displayed and
logged:
Replacement system detected due to system attribute change
Not restoring settings to replacement system
The user may enter the SysCon shell environment to manually adjust the transferred settings or allow the
system to reboot and use the system’s BIOS menus to adjust the settings and then enter the appropriate
key sequence during the reboot to save those adjusted settings to the SysCon Device.