IBM Carrier Grade X3650 T User Manual

IBM® Carrier Grade Server X3650 T
Revision 3.0
40
“startup.cmd” - the script will ask for the DOS drive letter to designate as the target device - be sure
that the target device drive letter is not the DOS drive letter of the SysCon device.
Device ‘0’ should be selected as the target of the installation; a new key will appear as uninstalled as
shown above. If the key has an existing SysCon environment on it, the version information will be
displayed. After the key has been installed the SysConMonitor service will be restarted, mapping the
SysCon Device and the new SysCon key under the “SysCon” folder. Use the “Safely Remove Hardware”
icon in the Windows taskbar before removing the key from the system. Be aware that there will be at least
two USB Mass Storage Devices listed. One of them will be the SysCon device, which should not
be
stopped: “IntelTSD Syscn HS-NAND USB Device.”

IBM Carrier Grade X3650 T Specifications

General

Brand	IBM
Model	Carrier Grade X3650 T
Category	Server
Language	English