EasyManuals Logo

IBM Deskstar 40GV User Manual

IBM Deskstar 40GV
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
1
Introduction
This manual was prepared to aid you in the installation of your new IBM Desk star hard disk drive.
Installation instructions are provided for the following model numbers:
IC35L020AVER07 (20 GB)
IC35L040AVER07 (40 GB)
IC35L060AVER07 (60 GB)
DTLA-307075 (75 GB)
The IBM Deskstar drive models listed above support Ultra ATA/100 and are backwards com-
patible with lower bus speeds, allowing it to obtain interface transfer rates of up to 100 MB per
second. Your drive will function at the maximum speed supported by your system components.
Ultra ATA/100 performance requires the following components:
A 40-pin, 80-conductor ATA/IDE cable
A controller card or motherboard chipset with Ultra ATA/100 or higher capability
An Ultra ATA/100-compatible BIOS
The IBM Deskstar drives listed above also support the following interface data transfer rates:
ATA Mode 5 100 MB per second
ATA Mode 4 66.6 MB per second
ATA Mode 2 33.3 MB per second
Multi-word DMA Mode 2 16.6 MB per second
Advanced PIO Mode 4 16.6 MB per second
The Frequently Asked Questions (FAQ) section of this manual contains further information on
Ultra ATA/100 and Ultra ATA/66.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM Deskstar 40GV and is the answer not in the manual?

IBM Deskstar 40GV Specifications

General IconGeneral
BrandIBM
ModelDeskstar 40GV
CategoryStorage
LanguageEnglish

Related product manuals