IBM DS8000 User Manual

The suspension reason codes explain the cause of the error that
suspended the primary remote mirror and copy devices. Table 6 on
page 163 explains the suspension reason codes.
Specific trap 210 - Global Mirror initial consistency group successfully
formed
This trap displays when the first consistency group in a Global
Mirror configuration has formed successfully. The following
information is shown for specific trap 210:
ssEventDescr=yyyy/MM/dd hh:mm:ss tzn
-error_description-
UNIT: Mnf Type-Mod SerialNm
xxx tttt-ooo pp-zzzzz
Session ID: qqqq
where yyyy/MM/dd hh:mm:ss tzn is the time that the alert was sent
(year, month, day, hour, minute, second, and time zone);
-error_description- is the event description; xxx is the manufacturer;
tttt-ooo is the machine type and model number; pp-zzzzz is the
serial number (a combination of the plant of manufacture and the
sequence number); and qqqq is the session identifier.
Specific trap 211 - Global Mirror session is in a fatal state
This trap displays when an error occurs that prevents the
formation of a consistency group and that requires you to correct
the problem before you can reform the consistency group. The
following information is shown for specific trap 211:
ssEventDescr=yyyy/MM/dd hh:mm:ss tzn
-error_description-
UNIT: Mnf Type-Mod SerialNm
xxx tttt-ooo pp-zzzzz
Session ID: qqqq
where yyyy/MM/dd hh:mm:ss tzn is the time that the alert was sent
(year, month, day, hour, minute, second, and time zone);
-error_description- is the event description; xxx is the manufacturer;
tttt-ooo is the machine type and model number; pp-zzzzz is the
serial number (a combination of the plant of manufacture and the
sequence number); and qqqq is the session identifier.
Specific trap 212 - Global Mirror consistency group failure - Retry will
be attempted
This trap displays when a consistency group fails to form. The
storage unit automatically continues to attempt to form a
consistency group. The following information is shown for specific
trap 212:
ssEventDescr=yyyy/MM/dd hh:mm:ss tzn
-error_description-
UNIT: Mnf Type-Mod SerialNm
xxx tttt-ooo pp-zzzzz
Session ID: qqqq
where yyyy/MM/dd hh:mm:ss tzn is the time that the alert was sent
(year, month, day, hour, minute, second, and time zone);
-error_description- is the event description; xxx is the manufacturer;
tttt-ooo is the machine type and model number; pp-zzzzz is the
serial number (a combination of the plant of manufacture and the
sequence number); and qqqq is the session identifier.
Appendix. Troubleshooting and analyzing problems 165

IBM DS8000 Specifications

General

Brand	IBM
Model	DS8000
Category	Storage
Language	English