IBM DS8000

Removing the IBM System Storage DS Storage Manager from a Linux
operating system
You can remove the IBM System Storage DS Storage Manager by following the
steps in this procedure.
1. Log on as root to the system where the DS8000 Storage Manager is installed.
2. Type: # <dest_path>/_uninst/uninstall to run the uninstallation program.
<dest_path> is the path where the IBM System Storage DS Storage Manager is
installed. If you used the default path, it is /opt/IBM/DS8000StorageManager.
The Uninstaller Welcome window is displayed.
################################################################################
#
# User Input Field - localityName
#
# The location (city). For a self-signed certificate, these fields are optional.
# However, commercial CAs might require them.
#
-W CertificateParams.localityName=""
################################################################################
#
# User Input Field - state
#
# The state or province (if applicable). For a self-signed certificate, these
# fields are optional. However, commercial CAs might require them.
#
-W CertificateParams.state=""
################################################################################
#
# User Input Field - country
#
# The two-letter identifier of the country/region in which the server belongs.
# For a self-signed certificate, these fields are optional. However, commercial
# CAs might require them.
#
-W CertificateParams.country="US"
################################################################################
#
# User Input Field - validity
#
# The lifetime of the certificate in days.
#
-W CertificateParams.validity="3650"
70 DS8000 User’s Guide