IBM DS8000 User Manual

Specific trap 213 - Global Mirror consistency group successful recovery
This trap displays when a consistency group forms successfully
after it had previously failed. The following information is shown
for specific trap 213:
ssEventDescr=yyyy/MM/dd hh:mm:ss tzn
-error_description-
UNIT: Mnf Type-Mod SerialNm
xxx tttt-ooo pp-zzzzz
Session ID: qqqq
where yyyy/MM/dd hh:mm:ss tzn is the time that the alert was sent
(year, month, day, hour, minute, second, and time zone);
-error_description- is the event description; xxx is the manufacturer;
tttt-ooo is the machine type and model number; pp-zzzzz is the
serial number (a combination of the plant of manufacture and the
sequence number); and qqqq is the session identifier.
Specific trap 214 - Global Mirror master terminated
This trap displays when a Global Mirror master is terminated by a
command. The following information is shown for specific trap
214:
ssEventDescr=yyyy/MM/dd hh:mm:ss tzn
-error_description-
UNIT: Mnf Type-Mod SerialNm
xxx tttt-ooo pp-zzzzz
Session ID: qqqq
where yyyy/MM/dd hh:mm:ss tzn is the time that the alert was sent
(year, month, day, hour, minute, second, and time zone);
-error_description- is the event description; xxx is the manufacturer;
tttt-ooo is the machine type and model number; pp-zzzzz is the
serial number (a combination of the plant of manufacture and the
sequence number); and qqqq is the session identifier.
Specific trap 215 - Global Mirror FlashCopy at remote site unsuccessful
This trap displays when the FlashCopy operation at the remote site
failed in a Global Mirror configuration. The following information
is shown for specific trap 215:
ssEventDescr=yyyy/MM/dd hh:mm:ss tzn
-error_description-
UNIT: Mnf Type-Mod SerialNm
Master: xxx tttt-ooo pp-zzzzz
Slave: xxx tttt-ooo pp-zzzzz
Session ID: qqqq
where yyyy/MM/dd hh:mm:ss tzn is the time that the alert was sent
(year, month, day, hour, minute, second, and time zone);
-error_description- is the event description; xxx is the manufacturer,
tttt-ooo is the machine type and model number; pp-zzzzz is the
serial number (a combination of the plant of manufacture and the
sequence number); and qqqq is the session identifier.
Specific trap 216 - Global Mirror slave termination unsuccessful
This trap displays when a Global Mirror master receives a
Terminate command and is unable to terminate a Global Mirror
slave. The following information is shown for specific trap 216:
166 DS8000 User’s Guide

IBM DS8000 Specifications

General

Brand	IBM
Model	DS8000
Category	Storage
Language	English