ENGLISH
Connecting your monitor
1. Connect the signal cable to the video port on the
back of your computer (figure A). Your computer
may have a video adapter card installed. In this
case, attach the signal cable to the connector on
the video adapter card (figure B).
2. Connect the power cord to the monitor first, then
firmly insert the plug into a properly grounded
electrical outlet.
3. Turn on the monitor, and then the computer.
If your monitor does not seem to be working correctly,
refer to the
Troubleshooting
section on page 17 for
help.
3
B
A
To Next Page
Loading...
Need help?
General
