@D.4.1 Customizing Paradox
@To customize Paradox, do the following.
@1. Start Paradox by typing:
@ PARADOX CUSTOM -REAL
@2. When the Paradox menu is displayed:
@ a. Select Tune and press Enter.
@ b. Select ProtectedMode and press Enter.
@ c. Select Configure and press Enter.
@ d. Follow the instructions displayed by Paradox.
@ Note: The keyboard will lock up. This is NORMAL. Turn the system
@ power off and start the process again. You must do this at
@ least twice. On the third attempt the CUSTOM script will run
@ to successful completion.
@3. While in the Custom script, set AUTOSAVE to NO. Select DEFAULTS, then
@ AUTOSAVE, then NO.
@ This prevents damage to disk files when returning to resume mode on
@ the L40 SX.
@4. Copy PARADOXK.EXE to a diskette for safe-keeping.
@ This file can be restored if you reinstall Paradox and you will not
@ have to run the CUSTOM program again.
PS/2 Model L40 SX Quick Reference
Customizing Paradox
¦ Copyright IBM Corp. 1991
D.4.1 - 1
To Next Page
Loading...
