#3.6 Using the Reference Diskette Version 1.01 or Later
The Reference Diskette provided with the Model L40 SX contains the
following programs.
Backup the Reference Diskette to make a backup copy of the Reference
Diskette
Set configuration to tailor the computer to your needs
Set features to operate your computer more effectively
Set passwords and network server mode to prevent unauthorized access
to your computer
Test the computer to test the computer hardware
Display revision levels to show the machine level
$ Utility installation program to make it easy to install certain
$ programs contained on the Reference Diskette. These programs include
$ utility and other programs that customize the environment.
| EMS memory manager to use the main storage above the 1MB boundary as
| the EMS memory
@ Power management device drivers to use suspend and resume modes under:
@ - OS/2
@ - Microsoft Windows 3.0
@ - QEMM 5.11 or later
@ - EMM386 in DOS 5.0.
Sample batch programs for the set features program to set or change
many operational features using one command.
# Utility programs to operate your computer more easily and more
# effectively. See Appendix E, "Utility Programs" in topic E.0.
The Reference Diskette is a permanently write-protected diskette. You can
read information from the diskette, but you cannot write (record)
information onto the diskette. Therefore, making a backup copy of the
diskette is necessary to use the above programs.
Once the backup copy is made, put the original diskette in a safe place
and always use the backup copy.
Subtopics
3.6.1 Starting the Reference Diskette Version 1.01 or Later
3.6.2 Backup the Reference Diskette
3.6.3 Set configuration
3.6.4 Set features menu
3.6.5 Set passwords and network server mode
3.6.6 Test the computer
3.6.7 Display revision levels
3.6.8 Utility installation program
PS/2 Model L40 SX Quick Reference
Using the Reference Diskette Version 1.01 or Later
¦ Copyright IBM Corp. 1991
3.6 - 1
To Next Page
Loading...
Need help?
General