IBM L40 SX User Manual

|3.5.2.1 Considerations for Resume Mode
|1. Pointing Devices
| Pointing devices are movement-sensitive. You cannot operate or move
| them during two short periods of time. The following shows the
| periods.
| PICTURE 76
|2. Attached Devices
| Attached devices, such as a printer and a serial device, can be reset
| or lose their configuration when returning to resume mode. Restart
| the application using the devices after resuming.
#3. Input Is Not Displayed
# Any screen on which you can enter data that appears after suspend
# mode, you can type in data but it is not displayed or executed until
# one beep sounds.
PS/2 Model L40 SX Quick Reference
Considerations for Resume Mode
¦ Copyright IBM Corp. 1991
3.5.2.1 - 1

IBM L40 SX Specifications

General

Brand	IBM
Model	L40 SX
Category	Desktop
Language	English