IBM L40 SX - Page 27

To Next Page

To Previous Page

# Note: If an external display is connected, the LCD display is

# disabled. The external display can be enabled or disabled

# using the Set features program. An external display can be

# referred to as a CRT display as compared to the LCD display in

# this manual. For more information, see page 3.8.3.1.

# Warning: The CRT must be attached before turning on the the computer.

# Unpredictable results can occur if the CRT is plugged in while the

# system is powered up.

7 System Expansion Connector offers an IBM Personal Computer AT

compatible interface.

8 Communication Interface Connector is reserved for the output of the

Serial Adapter (optional) or the Internal Data/Fax Modem (optional)

for external communication.

| (*) PS/2 is a trademark of the International Business Machines

| Corporation.

| (**) Centronics is a trademark of Centronics Data Computer

| Corporation.

PS/2 Model L40 SX Quick Reference

Identifying the Computer Features

2.4 - 2

Other manuals for IBM L40 SX