2. Press Enter. The keyboard is unlocked when you hear a beep.
To remove the keyboard password
Turn off the computer.
To change the keyboard password
This procedure allows you to set a keyboard password that is different
from your power-on password.
| +--- DOS 3.3 --------------------------------------------------------+
¦ ¦
| ¦ If you are using DOS 3.3, start with step 3. ¦
¦ ¦
+--------------------------------------------------------------------+
1. Go to Start Programs panel of DOS. Select File System and press
Enter.
2. File System panel appears. Press Shift+F9.
| 3. At the C:\> prompt, type KP /c and press Enter; follow the
instructions on the screen.
Notes:
|1. Ensure that the keyboard password program is installed on the hard
| disk or diskette that contains DOS. Go to the DOS prompt (usually
| C:\> or A:\>).
2. The keyboard password program works only with DOS.
|3. If you restart the computer (by pressing Ctrl+Alt+Delete) and then
lock the keyboard, the computer acts as if you typed KP /c.
#4. To keep the keyboard locked during and after partial suspend mode, you
# need to lock the keyboard using KP after setting a power-on password.
PS/2 Model L40 SX Quick Reference
Keyboard Password
¦ Copyright IBM Corp. 1991
3.7.3 - 2
To Next Page
Loading...
