Specification tables A-1
Appendix A. Specification tables
Memory module placement
This memory module placement table shows you how to place dual inline Memory
modules (DIMMs) into the sockets labelled DIMM1 Bank 0 and DIMM Bank 1. Refer
to the section “Identifying system board parts” on page 7-2 for the location of the
DIMM sockets.
Table 1: Memory module placement
DIMM Bank 0 DIMM Bank 1 TOTAL Memory
64M NONE 64M
128M NONE 128M
256M NONE 256M
64M 64M 128M
64M 128M 192M
64M 256M 320M
128M 64M 192M
128M 128M 256M
128M 256M 384M
256M 64M 320M
256M 128M 384M
256M 256M 512M
To Next Page
Loading...
