Recommended Action
NONE
Detail Data
SYSTEM MODEL
IBM, xxxx-xxx_IBM, xxxxxxxxx
RESOURCE CHANGE
proc
RESOURCE INSTALLED
.......
The RESOURCE INSTALLED is equal to the total number of installed processors (xx).
OLD VALUE
0
NEW VALUE
........
The NEW VALUE must equal (yy), recorded in step 2 on page 44.
5. Shutdown and reboot the system, as follows:
shutdown -Fr
6. Log in to the system as root user or as a user with system group privileges.
7. Type the following at the command line:
chcod
The following information displays:
Current MailAddress _______Reserved________
Current CustInfo Jane_Doe-CustomerNumber_9999999-Phone_(333)_444-5555
Current Model and System ID = IBM, xxxx-xxx_IBM,xxxxxxx
Current number of authorized proc(s) out of (xx_____) installed on system = (yy_____)
The values of (xx) and (yy) should match the values recorded in step 2 on page 44.
The processor Capacity Upgrade on Demand feature is enabled and ready to be used.
If you want to enable additional processors, go to “Enabling Additional Capacity
Upgrade on Demand Processors” on page 47.
46 Installation Guide
To Next Page
Loading...
Need help?
General