IBM RS/6000 Enterprise Server M80 - Step 7. Connecting the Cables; Connecting JTAG and VSCOMM Cables

Step 7. Connecting the Cables
Follow the procedures in this section to connect the cables. For instructions on routing
and securing cables, see “Routing and Securing Cables” on page 21.
Connecting JTAG and VS/COMM Cables
Refer to the following figure to connect the JTAG and VS/COMM cables.
CEC Drawer Attached to One I/O Drawer
V/S COMM
CEC Drawer
Primary I/O Drawer
V/S COMM
JTAG
JTAG
12 Installation Guide