16
Operation
The image is already
optimized for many display
modes; however the user controls
can be used to adjust the image to
your liking.
• Press the OSD Enter button to display the main OSD menu.
• Use the Arrow buttons to move among the icons. Select an icon and press
OSD Enter to access that function. If there is a sub-menu, you can move
between options using the Arrow buttons, then press OSD Enter to select
that function. Use the Arrow buttons to make adjustments. Press the
button to save.
The settings are saved after
adjustment and when
exiting the OSD and will be
effective thereafter.
• Press the Exit ( ) button to move backwards through the sub-menus
and exit from the OSD.
OSD Lock / Unlock
This feature allows you to secure the current control settings, while allowing
the user to adjust Brightness and Contrast, so that they cannot be
inadvertently changed. You can unlock the OSD controls at any time by using
the same procedure.
Push and hold the OSD Enter button for 10 seconds to Lock or to Unlock.
When locked, a “LOCKED” message will be displayed.
L170_E.fm Page 16 Friday, February 21, 2003 4:32 AM
To Next Page
Loading...
Need help?
General
