7
DEUTSCH
ENGLISHFRANÇAISESPAÑOLITALIANOJAPANESECOMPL & WARR
Switching on your Monitor
1. Switch on the power source and your computer.
2. Switch on your monitor by pushing and releasing the power switch
marked .
To switch off your monitor, push and release the power switch again.
3. Turn on the monitor and then the computer.
4. To update or install device drivers, follow the instructions in the Device
Driver Installation section on page 8.
5. To optimise the displayed image, run Auto Setup by following the
instructions in the Auto Setup section on page 11.
L170_E.fm Page 7 Friday, February 21, 2003 4:32 AM
To Next Page
Loading...
