August 15, 2017
© Copyright IBM Corporation, 2017 Page 114 of 117
Re-Inserting Copy Export Volumes
For Library Manager code levels earlier than 535.19, added physical volume will become unassigned
volumes and you will need to use the Manage Unassigned Volumes panel on the library manager to have
them returned to the TS7700.
Highlight the Unassigned volumes and press the Insert button followed by the Take Action button
The selected volumes are then added to the insert category and the TS7700 will see that they are volumes it
owns and return them to the pool they were in. Their state is changed to READ-WRITE and if they have no
active data on them, to the empty status as well
Note: With library manager level 535.19 and higher, physical volumes added to the library are directly
added to the insert category for the TS7700.
To Next Page
Loading...
Need help?
General
