IBM TS7700 Series User Manual

August 15, 2017
© Copyright IBM Corporation, 2017 Page 31 of 117
E0013 EXPORT PROCESSING SUSPENDED, WAITING FOR
SCRATCH VOLUME
This message is generated every five minutes when the TS7700
needs a scratch stacked volume to continue export processing and
there are none available.
Make one or more physical
scratch volumes available to the
TS7700 performing the export
operation. If the TS7700 does
not get access to a scratch
stacked volume in 60 minutes,
the operation is terminated.
E0014 EXPORT PROCESSING RESUMED, SCRATCH
VOLUME MADE AVAILABLE
This message is generated when, after the export operation was
suspended because no scratch stacked volumes were available,
scratch stacked volumes are again available and the export operation
can continue.
None.
E0015 EXPORT PROCESSING TERMINATED, WAITING FOR
SCRATCH VOLUME
This message is generated when the TS7700 has terminated the
export operation because scratch stacked volumes were not made
available to the TS7700 within 60 minutes of the first E0013
message.
Operator should make more
TS7700 stacked volumes
available, perform analysis of
the Status file on the Export List
File volume, and reissue the
Export operation.
E0016 COPYING LOGICAL EXPORT VOLUMES FROM
CACHE TO STACKED VOLUMES
This message is generated when the TS7700 begins, and every 10
minutes during, the process of copying logical volumes which are
only resident in the tape volume cache to physical volumes in the
specified secondary physical volume pool.
None.
E0017 COMPLETED COPY OF LOGICAL EXPORT VOLUMES
TO STACKED VOLUMES
This message is generated when the TS7700 has completed the copy
of all needed logical volumes from cache to physical volumes in the
specified secondary physical volume pool.
None.
E0018 EXPORT TERMINATED, EXCESSIVE TIME FOR COPY
TO STACKED VOLUMES
The export process has been terminated because one or more cache
resident only logical volumes needed for the export could not be
copied to physical volumes in the specified secondary physical
volume pool within a 10 hour period from the beginning the export
operation.
Call for IBM support.
E0019 EXPORT PROCESSING STARTED FOR POOL XX
This message is generated when the TS7700 export processing for
the specified secondary physical volume pool XX.
None.
E0020 EXPORT PROCESSING COMPLETED FOR POOL XX
None.

IBM TS7700 Series Specifications

General

Model	TS7700 Series
Type	Virtual Tape Library
Host Connectivity	Fibre Channel, FICON
Interface	Fibre Channel
Encryption	AES 256-bit
Form Factor	Rack-mountable
Drive Type	Virtual
Connectivity	Fibre Channel, FICON
Cache	Yes
Operating System Support	z/OS, Linux