August 15, 2017
© Copyright IBM Corporation, 2017 Page 98 of 117
2. Enter a one to eight-character alphanumeric name in the Name field. The name must be unique
within the management class construct names defined for the library. In this example, a
definition for management class MCPRIATL is being added.
3. Select a Secondary Pool. It is recommended that a single secondary pool be associated with a
single management class name for copy export use. In this example, pool 9 is being specified,
4. Enter a short description in the Description field.
5. If this is a grid configuration, enter Copy Actions for the TS7700s. Refer to the IBM®
Virtualization Engine TS7700 Series Best Practices - Copy Consistency Points whitepaper
(WP101230) on Techdocs for a description of Copy Actions.
6. Select the OK button to save the management class.
To Next Page
Loading...
Need help?
General
