IBM x3100 M3 4253 - Chapter 1. The System X3100 M3 Server

Chapter 1. The System x3100 M3 server
This Installation and User's Guide contains information and instructions for setting
up your IBM System x3100 M3 Type 4253 server, instructions for installing some
optional devices, and instructions for cabling, and configuring the server. For
removing and installing optional devices, diagnostics and troubleshooting
information, see the Problem Determination and Service Guide on the IBM System
x Documentation CD, which comes with the server.
The IBM
®
System x3100 M3 Type 4253 server is a 5u-high-high, high-performance,
self-contained server. It is ideally suited for networking environments that require
superior microprocessor performance, improved systems management, and flexible
memory and data management.
Performance, ease of use, reliability, and expansion capabilities were key
considerations in the design of the server. These design features make it possible
for you to customize the system hardware to meet your needs today and provide
flexible expansion capabilities for the future.
The server comes with a limited warranty. For information about the terms of the
warranty and getting service and assistance, see the printed Warranty Information
document that comes with your server.
The server contains IBM Enterprise X-Architecture
®
technologies, which help
increase performance, reliability, and availability. For more information, see “What
your server offers” on page 8 and “Reliability, availability, and serviceability” on page
8.
You can obtain up-to-date information about the server and other IBM server
products at http://www.ibm.com/systems/x/. At http://www.ibm.com/support/
mysupport/, you can create a personalized support page by identifying IBM
products that are of interest to you. From this personalized page, you can subscribe
to weekly e-mail notifications about new technical documents, search for information
and downloads, and access various administrative services.
If you participate in the IBM client reference program, you can share information
about your use of technology, best practices, and innovative solutions; build a
professional network; and gain visibility for your business. For more information
about the IBM client reference program, see http://www.ibm.com/ibm/
clientreference/.
The server supports up to four 3.5-inch simple-swap SATA hard disk drives.
1. Racks are measured in vertical increments of 4.45 cm (1.75 inches) each. Each increment is called a "U." A 1u-high device is 1.75
inches tall.
© Copyright IBM Corp. 2010
1