14
• Avoid areas subject to vibrations.
• Install the equipment on a rm and level surface, in open
air.
• Do not block ventilation.
• Avoid humid, hot and dusty environments.
• Make sure the area around the network cable is free.
• Do not insert objects into device holes.
SONOPULSE III Care Instructions
GENERAL EQUIPMENT CARE
• Disconnect the system from the power source, wipe
with a clean, lint free cloth moistened with water and mild
antibacterial soap.
• If a more sterile cleaning is needed, use a cloth moistened
with an antimicrobial cleaner.
• Do not place the system in liquids.
Cleaning the SONOPULSE III
The SONOPULSE III is an electronic device and has heavy
metals such as lead. Thus, there are risks of contamination
to the environment associated with the disposal of this
equipment and its accessories at the end of their useful lives.
The SONOPULSE III, parts and accessories must be disposed
of as waste. Contact your local distributor for information
on rules and laws regarding the disposal of waste electrical,
electronic equipment and accessories.
ENVIRONMENTAL PROTECTION
THE DEVICE AND ITS CONSUMABLE PARTS MUST
BE DISPOSED OF, AT END OF LIFE, ACCORDING
TO THE APPLICABLE FEDERAL AND/OR STATE
AND /OR LOCAL REGULATIONS.
Proper installation, operation and maintenance of
the equipment prevents security risks.
To Next Page