Iceco APL20 - Why Is There a Temperature DI Erence between the Actual Temp and the Set Temp in the 4 L Zone

Because of the sinking nature of cold
air, the dierent temperatures may
exist in dierent locations in the
refrigerator (the temperature of the
bottom will be the lowest).
The panel only shows the average
temperature of the refrigerator.
6.5 Why is there a temperature
dierence (between the actual
temperature of the refrigerator
and the set temperature)?
This is because the main temp control
zone of the compressor is the 16L area.
Normally, the actual temp in the 4L area
will be 9°F higher than the temp in the
16L area (lab data). So the temperature
in the 4L area will vary from the set temp.
6.6
22
Why is there a temperature
dierence between the actual temp
and the set temp in the 4L zone ?
This is because the main temp control zone of the
compressor is the 16L area. Normally, the actual temp
in the 4L area will be 9°F higher than the temp in the
16L area (lab data). So the temperature in the 4L area
will vary from the set temp.
6.9 Why is there a temperature dierence
between the actual temp and the set temp
in the 4L zone ?
19