Iceco APL20 - Triple Battery Protection Operation

In the power-on state (power on and press
the " " button to turn on the refrigerator;
the screen will display the temperature in the
power-on state), press and hold the " " and
" " buttons at the same time to enter the
advanced menu settings. After entering the
menu, press the " " button briey to
cycle through the functions of refrigerator
operation mode setting - battery protection
level setting - Celsius Fahrenheit switching,
and so on.
2.3 Triple Battery Protection Operation
05
Three bars appear on the screen when cycling
to Triple Battery Protection. Switch between
high and low battery protection modes by
briey pressing the " " or " " button.
2.3 Triple Battery Protection Operation
In the power-on state (press and hold the " " button
to turn on the refrigerator; the screen will display the
temperature in the power-on state), press and
hold the " " and " " buttons at the same time to
enter the advanced menu settings. After entering the
menu, press the " " button briey to cycle through
the functions of refrigerator operation mode
setting - battery protection evel setting - Celsius
Fahrenheit switching, and so on.
Three bars appear on the screen when cycling to
Triple Battery Protection. Switch between high and
low battery protection modes by briey pressing the
" " or " " button.
The three bars are H (High Mode), two are
M (Medium Mode) and one is L (Low Mode). The top
right corner of the screen will be labeled H\M\L to
refer to the three battery protection modes of H\M\L
respectively. Wait for 3 seconds after adjustment to
save the settings automatically.