Iceco VL75 ProD - Setting Temperature; Triple Battery Protection Operation

07
3.4 Setting Temperature
After the fridge turned on, the fridge's CURRENT
interior temperature reading will appear on the
display, as a solid non-ashing number. To
change the fridge's set temperature:
Press Temperature Up ( " " Button) to
increase the temperature of the right/left
zone.
Press Temperature Down ( " " Button) to
decrease the temperature of the right/left
zone.
The SET temperature will appear as a FLASHING
number and after the temperature is SET, the
display will return to show the fridge’s CURRENT
interior temperature.
08
3.4 Setting Temperature
After the fridge turned on, the fridge's CURRENT interior
temperature reading will appear on the display, as a
solid/non-ashing number.
To change the fridge's set temperature: Press
Temperature Up ( " " Button) to increase the
temperature of the right / left zone;
Press Temperature Down ( " " Button) to decrease
the temperature of the right / left zone.
The SET temperature will appear as a FLASHING
number, and after the temperature is SET, the display
will return to show the fridge's CURRENT interior
temperature.
After the fridge turned on, press Battery
Protection " " Button to adjust the fridge's low
battery protection level pre-sets.
3.5 Triple Battery Protection Operation
NOTICE: Details of Battery Protection
Mode could be found in Page 20.