11
The DC Voltage is below the protection settings and
the battery protection mode is activated.
E1 Error Code
E1 Solutions
1. In case of using in the car, turn the car ignition on
and start the refrigerator again;
2. In the case of using the AC adapter to connect the
electricity at home, you can adjust the battery
protection to medium or low mode. If it still does not
start after adjusting the mode, then the adapter
is faulty and needs to be replaced with a new one.
If the fan does not start but the compressor does,
this is a short-circuited fan. You can x the error code
by replacing the fan.
E2 Solutions
The cooling fan is over-loaded with more than 1A
of current.
E2 Error Code
11
E1
Error Code
The DC Voltage is below the protection settings and
the battery protection mode is activated.
Solutions
1. In case of using in the car, turn the car ignition on
and start the refrigerator again;
2. In the case of using the AC cable to connect the
electricity at AC socket, you can adjust the battery
protection to medium or low mode. If it still does not
start after adjusting the mode, then the adapter is
faulty and needs to be replaced with a new one.
E2
Error Code
The cooling fan is over-loaded with more than 1A of
current.
Solutions
If the fan does not start but the compressor does, this
is a short-circuited fan. You can x the error code by
replacing the fan.
To Next Page
Loading...
