Need help?Do you have a question about the Icematic F 125C and is the answer not in the manual?
Instructions for making safe and correct electrical hookups, including voltage and fuse checks.
Step-by-step guide for powering on the unit and initiating the ice-making process.
Details on float reservoir, freezing cylinder, auger, gear motor, fan motor, and compressor.
Step-by-step guide for replacing the magnetic sensor on the gear motor.
Detailed procedures for replacing wear components of the auger assembly.
Steps for removing and installing the entire gear motor assembly.
Procedure for replacing the freezing cylinder, including refrigerant handling and system evacuation.
Detailed steps for cleaning the water system, reservoir, and related components.
To Next Page
General
