1.2. Reception of the machine
Inspect the outside packing. In case of damages, make the corresponding claim to the carrier.
To confirm the existence of damages, unpack the machine in the presence of the carrier and
state any damage on the equipment on the reception document or freight document.
Always state the machine number and model. This number is printed on three locations:
(1) Packing: On the outside, it contains a label with the serial number.
(2) Exterior of the unit: On the back panel of the unit, there is a label with the same
characteristics as the previous one.
(3) Nameplate: On the back of the machine.
Check that in interior of the machine the installation kit is complete and comprises:
• Scoop, drain hose, four legs and manual.
• Warranty and serial number.
To Next Page
Loading...
