Icom A25N 46 USA - Selecting the 121.5 Mhz Emergency Frequency; Selecting the Recall Channels

New2001
9
4
BASIC OPERATION
New2001
■ Selecting the 121.5 MHz
emergency frequency
In case of emergency, you can immediately select the
121.5 MHz emergency frequency.
z Push [F], and then push [121.5] to
select the emergency frequency.
L Push [CLR] to return to the previously
selected frequency.
■ Selecting the Recall channels
The transceiver stores the previously selected frequencies
in the “Recall CH.” You can easily select them without
rotating [DIAL] or accessing memory.
1. Push the Directional key to
display the “Recall CH” screen.
2. Select the channel.
• The selected channel will be set in 3
seconds.
L It is not necessary to push [ENT]
to select the channel.
L Push [CLR] to return to the
previously selected frequency.