How to fix Icom IC-A25C that does not turn on?
If your Icom Transceiver does not turn on, there could be a few reasons. First, the battery might be exhausted, in which case you should recharge it. Second, the battery pack may not be correctly attached; try reattaching it properly. Lastly, if you are using the CP-20, its fuse might be blown. If so, repair the underlying problem and then replace the fuse.
Why Icom IC-A25C Transceiver will not transmit?
If you cannot transmit with your Icom Transceiver, ensure that you have selected a COM band frequency, as you cannot transmit on a weather channel or VOR frequency. Also, check if the battery is exhausted and recharge it if necessary.
What to do if Icom IC-A25C Transceiver keypad is locked?
If your Icom Transceiver displays “Locked” when you push keypad keys or rotate [DIAL], the keypad and [DIAL] are likely locked. To unlock them, push [F], and then push [ ].
Why scan does not start on Icom Transceiver?
If the scan function does not start on your Icom Transceiver, it may be because all memory channels in the selected group are not tagged. To resolve this, tag memory channels on the Menu screen.
How to turn on beep sound on Icom IC-A25C?
If you are not hearing any beep sounds on your Icom Transceiver, the beep output level may be set to OFF. Adjust the beep output level on the Menu screen by going to [MENU] > Sounds Settings > Beep.
Detailed labeling and explanation of the transceiver's physical controls and connectors.
Explanation of the screen layout, icons, and text areas.
Guide to receiving signals and transmitting, including frequency setting and squelch adjustment.
How to select a waypoint from memory, flight plan, history, or manual entry.
How to edit memory channel names, types, frequencies, and other settings.
Steps for pairing Bluetooth headsets and data devices with the transceiver.
Guide to accessing and navigating through the transceiver's menu system.
Detailed explanation of Waypoint Navigation menu items.
Table listing common issues, their causes, and solutions for the transceiver.
Instructions on how to replace a blown fuse in the optional cigarette lighter cable.
General| Purpose | Aviation Service (Air Band) |
|---|---|
| Operating frequency | 118.000 – 136.992 MHz |
| Display type | LCD |
| Display diagonal | 2.3 \ |
| Battery type | BP-288 |
| Battery life (max) | 10.5 h |
| Battery low indication | Yes |
| Number of batteries supported | 1 |
| Product color | Black |
| Operating temperature (T-T) | -10 - 60 °C |
| Number of batteries included | 1 pc(s) |
| Antenna connector type | FA-B02AR |
Weight and Dimensions| Depth | 31.8 mm |
|---|---|
| Width | 58.9 mm |
| Height | 148.4 mm |
| Weight | 384 g |
To Next Page
