11
MENU ITEMS
11-6
Manage Memory
D Edit Memory
([MENU] > Manage Memory > Edit Memory)
Edit the Memory channel contents. (p. 8-2)
D Delete Memory
([MENU] > Manage Memory > Delete Memory)
Delete an unwanted memory channel. (p. 8-5)
User Type 1/User Type 2
Edit the type names (“U-1” and “U-2”) that represent
the Memory channel type. (p. 8-3)
Radio Settings
D Time Out Timer
([MENU] > Radio Settings > Time Out Timer)
Turn the Time Out Timer (TOT) function ON or OFF.
This function limits continuous transmissions on the
channel, to prevent from occupying the channel for a
long period of time.
• OFF: Turns OFF the function.
• 20 sec to 180 sec: Set the Time-out Timer to
between 20 seconds and
180 seconds.
D Weather Alert
(For only the IC-A25N and IC-A25C)
([MENU] > Radio Settings > Weather Alert)
Turn the Weather Alert function ON or OFF.
This function detects the weather alert tone on
Weather channels.
The National Oceanic and Atmospheric Administration
(NOAA) broadcast station transmits a weather alert
tone before any important weather information.
(p. 9-3)
• OFF: The transceiver does not detect a Weather
alert tone.
• ON: The transceiver detects the 1050 Hz weather
alert tone on a Weather channel or on the
previously selected Weather channel while
scanning.
D WX CH TAG Set
(For only the IC-A25N and IC-A25C)
([MENU] > Radio Settings > WX CH TAG Set)
Select whether or not to tag each Weather channel.
(p. 9-3)
OFF: The channel is skipped while scanning.
ON: The channel is scanned while scanning.
D Duplex Set
([MENU] > Radio Settings > Duplex Set)
Select whether or not to use the Duplex function.
(p. 9-4)
L This item is displayed for all versions. However, it may be
usable only in the USA.
• OFF: Turns OFF the function.
• ON: You can call a ight service station while
receiving an NAV band frequency.
D Duplex TX Freq
([MENU] > Radio Settings > Duplex TX Freq)
Enter the transmit frequency when the Duplex function
is ON.
D VOX Set
([MENU] > Radio Settings > VOX Set)
Turn the VOX function ON or OFF.
The function automatically switches between receive
and transmit by detecting your voice.
• OFF: Turns OFF the function.
• ON: Switches between receive and transmit by
detecting your voice.
D VOX Delay
([MENU] > Radio Settings > VOX Delay)
Set the VOX Delay to between 0.5 sec and 3.0 sec.
The VOX Delay is the amount of time the transmitter
stays ON after you stop speaking until the VOX
switches to receive.
D VOX Level
([MENU] > Radio Settings > VOX Level)
Set the VOX gain level to between 1 and 6.
Higher values make the VOX function more sensitive
to your voice.
NOTE: You cannot switch the optional VS-3
Bluetooth headset to other devices, if the VOX level
is set to 6.
D Priority CH
([MENU] > Radio Settings > Priority CH)
Set the Priority channel. (p. 9-2)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
