How to fix Icom IC-A25C that does not turn on?
If your Icom Transceiver does not turn on, there could be a few reasons. First, the battery might be exhausted, in which case you should recharge it. Second, the battery pack may not be correctly attached; try reattaching it properly. Lastly, if you are using the CP-20, its fuse might be blown. If so, repair the underlying problem and then replace the fuse.
Why Icom IC-A25C Transceiver will not transmit?
If you cannot transmit with your Icom Transceiver, ensure that you have selected a COM band frequency, as you cannot transmit on a weather channel or VOR frequency. Also, check if the battery is exhausted and recharge it if necessary.
What to do if Icom IC-A25C Transceiver keypad is locked?
If your Icom Transceiver displays “Locked” when you push keypad keys or rotate [DIAL], the keypad and [DIAL] are likely locked. To unlock them, push [F], and then push [ ].
General| Purpose | Aviation Service (Air Band) |
|---|---|
| Operating frequency | 118.000 – 136.992 MHz |
| Display type | LCD |
| Display diagonal | 2.3 \ |
| Battery type | BP-288 |
| Battery life (max) | 10.5 h |
| Battery low indication | Yes |
| Number of batteries supported | 1 |
| Product color | Black |
| Operating temperature (T-T) | -10 - 60 °C |
| Number of batteries included | 1 pc(s) |
| Antenna connector type | FA-B02AR |
Weight and Dimensions| Depth | 31.8 mm |
|---|---|
| Width | 58.9 mm |
| Height | 148.4 mm |
| Weight | 384 g |
To Next Page
