To Next PageTo Next PageHow to fix Icom IC-A25NE Transceiver that does not turn on?
If your Icom Transceiver does not turn on, there could be a few reasons. First, the battery might be exhausted, in which case you should recharge it. Second, the battery pack may not be correctly attached; try reattaching it properly. Lastly, if you are using the CP-20, its fuse might be blown. If so, repair the underlying problem and then replace the fuse.
Why Icom IC-A25NE will not transmit?
If you cannot transmit with your Icom Transceiver, ensure that you have selected a COM band frequency, as you cannot transmit on a weather channel or VOR frequency. Also, check if the battery is exhausted and recharge it if necessary.
What to do if Icom IC-A25NE Transceiver keypad is locked?
If your Icom Transceiver displays “Locked” when you push keypad keys or rotate [DIAL], the keypad and [DIAL] are likely locked. To unlock them, push [F], and then push [ ].
Why scan does not start on Icom IC-A25NE Transceiver?
If the scan function does not start on your Icom Transceiver, it may be because all memory channels in the selected group are not tagged. To resolve this, tag memory channels on the Menu screen.
How to turn on beep sound on Icom IC-A25NE Transceiver?
If you are not hearing any beep sounds on your Icom Transceiver, the beep output level may be set to OFF. Adjust the beep output level on the Menu screen by going to [MENU] > Sounds Settings > Beep.
General| Channel Spacing | 8.33 kHz / 25 kHz |
|---|---|
| Waterproof Rating | IP57 |
| Display Type | LCD |
| GPS Functionality | Yes |
| Bluetooth | No |
| Type | Handheld Aviation Transceiver |
| Mode | AM |
| Power Output | 5 W |
| Frequency Range | 118.000–136.99166 MHz |
Instructions for attaching antennas, battery packs, and belt clips.
Details how to connect a headset adapter and use a headset.
Identifies and explains the function of all physical buttons and controls.
Explains the icons and text displayed on the transceiver's screen.
Details how to charge the battery pack using the provided charger.
Instructions for installing AA alkaline batteries into the optional battery case.
Covers fundamental operations like setting frequencies, receiving, and transmitting.
Explains the CDI screen, showing course deviation and heading.
Instructions on how to edit memory channel names, types, frequencies, and other settings.
Guides on saving current positions as waypoints or saving frequencies to memory.
Step-by-step guide on how to pair Bluetooth headsets and data devices.
Provides common problems, their possible causes, and solutions for the transceiver.
