6
WAYPOINT NAVIGATION
6-4
You can edit, add, or delete ight plans on the
“Manage FPL” screen.
NOTE: You cannot edit, add, or delete ight plans
when they are used in the Navigation function.*
Turn OFF the Navigation function before editing the
ight plan.
([MENU] > WPT Navigation > <WPT NAV OFF>)
* “Cannot edit. Memory is used in Navigation.” is displayed.
D Adding a ight plan
1. Open the “Add FPL” screen.
( [MENU] > WPT Navigation > Manage FPL >
Add FPL)
• The “Add FPL” screen is displayed.
2. Select “Name,” and then push [ENT].
• The “Name” screen is displayed.
3. Enter the name using keypad keys.
L Push [MENU] to return to the Main screen without
making any changes.*
* A conrmation dialog is displayed.
4. After editing, push [ENT] to return to the “Add
FPL” screen.
5. Select “Add Waypoint,” and then push [ENT].
• The “Group List” screen is displayed.
6. Select a group, and then push [ENT].
• Waypoints saved in the selected group are listed.
7. Select a waypoint, and then push [ENT].
• The “Course To” screen is displayed.
8. Enter the course, and then push [ENT].
• The “Add FPL” screen is displayed.
9. Repeat steps 5 to 8 to add more waypoints, if
necessary.
10. Select “<Write>,” and then push [ENT] to save the
flight plan.*
*A conrmation dialog is displayed.
TIP:
Changing the waypoint order/
Deleting the added waypoint:
1. Select “Waypoint,” and then push [ENT].
• The “Waypoint List” screen is displayed.
2. Select a waypoint.
3. Push [F], and then push [UP] or [DOWN] to
change the selected waypoint.
L Push [F], and then push [DEL] to delete the
selected waypoint.
Managing Flight plans
To Next Page
Loading...
Need help?
General
Weight and Dimensions
