Icom IC-A25C User Manual

5
VOR NAVIGATION
5-3
1. Select a VOR station’s frequency.
• The CDI screen is displayed.
2. Push [F], and then push [OBS] to enter the OBS
mode.
• The OBS value is highlighted.
• The Course deviation is displayed, as shown below.
3. Push [ENT].
4. Confirm the TO/FROM indicator displays “TO.”
• If “FROM” is displayed, push [F], and then push [TO
FROM] to display “TO.”
5. Maintain the heading that the Course Deviation
Needle comes to the center of CDI.
NOTE: The IC-A25N and IC-A25NE’s VOR
Navigation features are supplemental aids to
navigation only, and are not intended to be a
substitute for primary VOR navigation equipment.
Flying to a VOR station
TIP: Using the Auto Bearing Set System (ABSS):
You can set your current heading as the course
heading.
Example:
Your OBS course heading is set to 045. However,
your current heading is 066 to the VOR. You want
to set your current heading as the OBS course
heading.
1. Push [F], and then push [TO FROM].
• “FROM 246” is displayed, and OBS is set to 246.
2. Push [F], and then push [TO FROM] again.
• “TO 066” is displayed, and OBS is set to 066.

Icom IC-A25C Specifications

General

Purpose	Aviation Service (Air Band)
Operating frequency	118.000 – 136.992 MHz
Display type	LCD
Display diagonal	2.3 \
Battery type	BP-288
Battery life (max)	10.5 h
Battery low indication	Yes
Number of batteries supported	1
Product color	Black
Operating temperature (T-T)	-10 - 60 °C
Number of batteries included	1 pc(s)
Antenna connector type	FA-B02AR

Weight and Dimensions

Depth	31.8 mm
Width	58.9 mm
Height	148.4 mm
Weight	384 g