BASIC OPERATION
2
11
Transmitting notes D
Transmit inhibit function•
The transceiver has several inhibit functions which restrict
transmission under the following conditions:
- The channel is busy.
However, depending on the presettings, you can transmit
when the call includes an unmatched (or matched) CTC-
SS (DTCS) tone.
- The selected channel is a ‘receive only’ channel.
Time-out timer•
If continuous transmission exceeds the preprogrammed
time-out timer limit, transmission is cut off.
Penalty timer•
The time-out timer cuts off transmission, further transmis-
sion is inhibited for the preprogrammed penalty timer peri-
od.
Receiving a Stun, Kill and Revive call D
The dispatcher can send a 2-Tone or 5-Tone that will stun, kill
or revive your transceiver.
When the Stun call is received, beeps sound*, and you can-
not receive or transmit. Receiving a Revive call, or entering a
password*, is necessary to operate the transceiver again.
When the Kill call is received, beeps sound*, and the trans-
ceiver becomes unusable. Cloning the transceiver is neces-
sary to operate the transceiver again, in this case.
* Depending on the presetting. Ask your dealer for details.
To Next Page
Loading...
