Icom IC-207H - Page 71

Auto powe r-off use [INITIAL SET MODE
2 auto power-off function conveniently turns the transceiver
ver OFF after a preset time in which no operations are per-
ned. In this way, when you forget to turn the power OFF,
transceiver automatically turns itself OFF, thereby con-
ving battery power.
> time can be set to 30 min., 1 hr., 2 hrs. or turned OFF.
> selected time is retained even when the transceiver is
ned OFF via the auto power-off function. To cancel the
ction, select “oF” in step @ below.
>ush [PWR] to turn power OFF.
Nhile pushing [SET], turn power ON to enter initial set
node.
>ush [SET] one or more times until “PoF” appears.
Pushing [MONI] reverses the order of selection.
Rotate the tuning dial to
select the desired auto
sower-off time or turn the
imer OFF (“oF”).
“AO” appears when an auto
power-off time is set.
Push [PWR] momentarily to exit initial set mode.
The display shows that the
30 min. timer is selected.
OTHER FUNCTIONS 14
usins INITIAL SET MODE
@ Cooling fan
setting
The transceiver has a heatsink and cooling fan to radiate
heat. The cooling fan automatically turns ON while transmit-
ting and remains ON for 2 min. after transmitting. The cool-
ing fan can be activated continuously, if desired.
The display shows that the The display shows that the
cooling fan is set for automatic cooling fan is set for continuous
operation. operation.
@ Push [PWR] to turn power OFF.
@ While pushing [SET], turn power ON to enter initial set
mode.
@ Push [SET] one or more times until “FAn” appears.
¢ Pushing [MONI] reverses the order of selection.
@ Rotate the tuning dial to set the cooling fan to automatic
(“At”) or continuous (“on”).
© Push [PWR] momentarily to exit initial set mode.
ENGLISH