Icom IC-207H - Page 72

14 OTHER FUNCTIONS
@ Microphone [F-1]/[F-2] keys
Switches on the transceiver’s front panel can be assigned to
the microphone’s [F-1] and [F-2] keys.
@® Turn power OFF.
@ While pushing the desired switch on the transceiver and
[F-1] or [F-2] on the microphone, turn power ON.
e The switches’ function is programmed into the key ([F-1] or [F-2]).
° Default setting
The following functions are assigned to the [F-1]/[F-2] keys
when first applying power or after CPU resetting:
[F-1]: selects output power; push and hold to select duplex
setting
[F-2]: selects a tone function or none at all; push and hold to
start/stop tone scan
—
@ Display dimmer weve SET MG
Adjust to suit lighting conditions and personal preference!
@® Push and hold [SET] one or more times until “d-1"—“d4”|
pears as follows.
¢ Pushing [MONI] reverses the order of selection.
@ Rotate the tuning dial to ae “a
set the desired intensity. fee ot
¢ Intensity can be set from “d1”
(dark) to “d4” (bright).
@ Push [V/MHz] to return to
normal operation.
“The display shows the re
backlighting set to brightest:
(
'
(
(
(
(
(